| Input voltage | 24 V DC, range 22 to 29 V |
| Cut-in threshold for buffering | adjustable from 22 to 25.5 V in steps of 0.5 V, preset 22.5 V |
| Input current at 24 V | 40 A, plus approx. 2.6 A with empty battery |
| Energy storage | batteries in battery module, modularly expandable |
| Buffer time | depends on the connected battery and the load current |
| Output voltage | 24 V DC, in normal operation input voltage minus approx. 0.5 V, in buffering mode 19 to 28.5 V |
| Output current | rated 40 A, 0 to 40 A in normal and buffering mode |
| Peak current | 42 A |
| Charging current | 1 A or 2 A |
| Startup delay | typ. 1 s |
| Voltage rise time | typ. 360 ms |
| Efficiency | typ. 97.2% at rated load, typ. 96.9% in battery operation |
| Power loss | typ. 28.6 W at rated load, typ. 33.6 W in battery operation |
| Active power output | typ. 960 W |
| Reverse polarity protection | for energy storage and input voltage |
| Indicators | green LED (OK), yellow LED (Bat, buffering mode), red LED (alarm), green LED (Bat > 85%) |
| Signaling contacts | floating changeover contacts "Bat/OK" and "Alarm/Bat", NO contact "Bat > 85", rated DC 60 V/1 A or AC 30 V/1 A |
| Signals | lack of buffer standby, battery replacement required (LED flashes at approx. 0.25 Hz), prewarning at battery voltage below 20.4 V DC, energy storage above 85% |
| Interface | none, no PC interface and no communication function |
| Electrical isolation between input and output | no |
| Protection class | Class III |
| Degree of protection | IP20 |
| Electromagnetic compatibility | emitted interference EN 55022 Class B, interference immunity EN 61000-6-2 |
| Certifications | CE, cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259, EAC, shipbuilding approval ABS and DNV |
| MTBF at 40 °C | 522 739 h |
| Operating ambient temperature | −25 to +60 °C with natural convection |
| Storage and transport temperature | −40 to +85 °C |
| Climate class | 3K3 according to IEC 60721, 5 to 95% no condensation |
| Input, output and battery module connections | 2 screw terminals each for 0.33 to 10 mm² (22 to 7 AWG) |
| Control and signaling circuit connection | 10 screw terminals for 0.5 to 2.5 mm² (20 to 13 AWG) |
| Dimensions (W × H × D) | 102 × 125 × 125 mm |
| Installation width × mounting height | 102 mm × 225 mm |
| Mounting clearances | top and bottom 50 mm each, left and right 0 mm |
| Mounting | snaps onto DIN rail EN 60715 35×7.5/15, can be lined up |
| Weight | 1.1 kg |
| Accessories | battery module |