Terminal expansion for snapping onto a DIN rail according to EN 60715 with eight digital inputs, four bidirectional digital inputs/outputs, two analog inputs, two analog outputs, two relay outputs with changeover contact and one temperature sensor input. It is connected via two drive interfaces, and the electronics are supplied with 24 V DC.
General
| Manufacturer | Siemens |
| Type / model | TM31 |
| Article number | 6SL3055-0AA00-3AA1 |
| Order number | 6SL3055-0AA00-3AA1 |
| Series | SINAMICS |
| Condition | Used |
Technical data
| Electronics power supply | 24 V DC (20.4 to 28.8 V) |
| Current consumption at 24 V DC | 0.5 A (without DRIVE-CLiQ supply and digital outputs) |
| Power loss, max. | 10 W |
| Drive interfaces | 2 × DRIVE-CLiQ |
| Digital inputs | 8, -3 to 30 V (low -3 to 5 V, high 15 to 30 V), 9 mA at 24 V DC |
| Delay time of digital inputs | L → H approx. 50 µs, H → L approx. 100 µs |
| Digital inputs/outputs | 4, parameterizable, as inputs identical to the digital inputs |
| Digital outputs | 24 V, max. 100 mA, short-circuit proof, delay typ. 150 µs, max. 500 µs |
| Analog inputs | 2, switchable between voltage and current |
| Analog input as voltage input | -10 to 10 V, 11 bit + sign, 100 kOhm |
| Analog input as current input | -20 to 20 mA, 10 bit + sign, 250 Ohm |
| Analog outputs | 2, short-circuit proof, -10 to 10 V (max. ±3 mA) or -20 to 20 mA (load 500 Ohm), 11 bit + sign |
| Relay outputs | 2 changeover contacts, 8 A at 250 V AC or 30 V DC, max. 2 000 VA or 240 W, minimum current 100 mA |
| Temperature sensor input | 1 for KTY84-130, Pt1000 or PTC (Pt1000 from firmware V4.7 HF17) |
| Conductor cross-section, max. | signals 1.5 mm² (AWG 16), relays and supply 2.5 mm² (AWG 14) |
| PE connection | M4 screw |
| Mounting | DIN rail according to EN 60715 |
| Dimensions (W × H × D) | 50 × 150 × 111 mm |
| Net weight | 0.49 kg |
| Approval | cULus |