| Rated output current | 5.0 A |
| Base load current | 4.3 A |
| Current for S6 duty (40 %) | 6.7 A |
| Peak current | 15.0 A |
| Overload capability | up to 300 % (D-type) |
| Output voltage | 3 AC 0 to 0.717 × DC link voltage (0 to 480 V at DC 670 V) |
| DC link voltage | DC 510 to 720 V |
| DC link current | 6.0 A |
| DC link capacitance | 110 µF |
| Electronics power supply | DC 24 V, −15 % / +20 % |
| Electronics current consumption | max. 0.75 A |
| Type rating based on rated current | 2.7 kW |
| Type rating based on base load current | 2.3 kW |
| Pulse frequency | 4 kHz rated value, up to 16 kHz with derating |
| Output frequency with servo control | 650 Hz (with high output frequency license, otherwise max. 550 Hz) |
| Output frequency with V/f control | 600 Hz (with high output frequency license, otherwise max. 550 Hz) |
| Output frequency with vector control | 300 Hz |
| Current carrying capacity of DC link busbars | 100 A (200 A with reinforced DC link bridges) |
| Current carrying capacity of 24 V busbars | 20 A |
| Cooling | internal air cooling with built-in fan |
| Cooling air requirement | 0.009 m³/s |
| Ambient temperature in operation | 0 to 40 °C, up to 55 °C with derating |
| Installation altitude without derating | 1000 m |
| Motor connection | connector X1 with brake connection, 1.5 to 6 mm² |
| Brake output | 24 V DC, max. 2 A, min. 0.1 A |
| Protective conductor connection | M5 screw |
| Maximum motor cable length | 50 m shielded, 75 m unshielded |
| Number of drive interfaces | 3 (DRIVE-CLiQ, X200 to X202) |
| Terminals X21 | temperature sensor (KTY84-130, Pt1000, PTC, bimetallic switch with NC contact) and pulse enable (EP), 24 V DC |
| Safety integrity | SIL 2 to IEC 61508, PL d and category 3 to EN ISO 13849-1 |
| Standards | CE, cULus |
| Degree of protection | IP20 / UL open type |
| Design | Booksize, D-type |
| Dimensions (W × H × D) | 50 × 380 × 270 mm |
| Weight | 4.6 kg |
| Sound pressure level | 60 dB (1 m) |
| Power loss | typ. 0.04 kW, max. 0.07 kW |