Central control module in a 50 mm wide booksize format with four drive interfaces, one PROFIBUS interface, one serial RS232 interface, eight isolated digital inputs and eight bidirectional digital inputs/outputs. Firmware and parameters are stored on a plug-in CompactFlash card, which is not included with this spare part. In addition, there is a slot for an option module and a connection for an operator panel.
General
| Manufacturer | Siemens |
| Type / model | CU320 |
| Article number | 6SL3040-0MA00-0AA1 |
| Order number | 6SL3040-0MA00-0AA1 |
| Series | SINAMICS S120 |
| Condition | Used |
Technical data
| Scope of delivery | Spare part without CompactFlash card (card with firmware and parameters not included) |
| Electronics power supply | 24 V DC |
| Current consumption at 24 V DC, max. | 0.8 A (without digital outputs, option slot and DRIVE-CLiQ supply) |
| Fuse protection, max. | 20 A |
| Conductor cross-section for supply, max. | 2.5 mm² |
| Drive interfaces | 4 × DRIVE-CLiQ |
| Fieldbus | PROFIBUS with PROFIdrive profile V4 |
| Serial interface | 1 × RS232 |
| Digital inputs | 8, isolated, parameterizable |
| Digital inputs/outputs | 8, bidirectional, non-isolated, 6 of them high-speed inputs |
| Input voltage of digital inputs | -3 to 30 V (low -3 to 5 V, high 15 to 30 V) |
| Input current of digital inputs | typ. 10 mA at 24 V DC |
| Signal propagation delay of digital inputs | L → H approx. 50 µs, H → L approx. 100 µs |
| Signal propagation delay of high-speed digital inputs | L → H approx. 5 µs, H → L approx. 50 µs |
| Digital outputs | 24 V DC, max. 500 mA per output, continuously short-circuit proof |
| Conductor cross-section for signals, max. | 0.5 mm² |
| Slots | CompactFlash card (card not included), option module, BOP20 operator panel |
| Power loss | 20 W |
| PE and ground connection | on housing with M5 screw |
| Dimensions (W × H × D) | 50 × 270 × 226 mm |
| Weight | approx. 1.5 kg |
| Approval | cULus |
| Successor type | CU320-2 DP (6SL3040-1MA00-0AA0), CU320-2 PN (6SL3040-1MA01-0AA0) |