| Design | Compact unit, DC supply, 14 DI, 10 DO, 2 AI, 1 AO |
| Supply voltage | 24 V DC (20.4 to 28.8 V) |
| Inrush current | max. 12 A at 28.8 V |
| Current consumption from the supply | max. 900 mA |
| Output current for expansion modules (5 V DC) | 660 mA |
| Encoder supply 24 V | max. 280 mA, electronically short-circuit protected, permissible range 15.4 to 28.8 V |
| Power loss | typ. 8 W |
| Program memory | 16 KB (12 KB with active run-time edit) |
| Data memory | 10 KB |
| Memory module | 1 pluggable (optional), content identical with the integrated EEPROM |
| Backup time | max. 100 h (min. 70 h at 40 °C), typ. 200 days with optional battery module |
| Execution time bit operation | max. 0.22 µs |
| Counters | 256 (counting range 0 to 32 767) |
| Timers | 256 (1 ms to 54 min) |
| Flags | 32 bytes |
| Expansion modules | max. 7 (only modules of the same series) |
| Digital inputs and outputs, maximum | 168 (max. 94 inputs and 74 outputs) |
| Analog inputs and outputs | onboard 2 inputs and 1 output, maximum 38 |
| Digital inputs | 14, 24 V DC, signal 0 from 0 to 5 V, signal 1 from 15 V (I0.3 to I0.5: up to 1 V and from 4 V respectively) |
| Input current at signal 1 | typ. 2.5 mA (I0.3 to I0.5: 8 mA) |
| Input delay | 0.2 to 12.8 ms, configurable |
| Interrupt inputs | 4 (rising and/or falling edge) |
| High-speed counters | 6, 32 bit (2 to 200 kHz, 4 to 30 kHz) |
| Digital outputs | 10, transistor, without short-circuit protection |
| Switching capacity per output | 0.75 A with resistive load, 5 W with lamp load |
| Total current per output group | 3.75 A |
| Pulse outputs | 2 (Q0.0 and Q0.1), limit frequency 20 kHz, pulse-width and frequency modulation |
| Switching frequency of the pulse outputs with resistive load | max. 100 kHz |
| Analog potentiometers | 2, resolution 8 bit |
| Interfaces | 2 × RS485 (PPI, MPI slave, freeport) |
| Transfer rates | PPI 9.6/19.2/187.5 kbit/s, MPI 19.2/187.5 kbit/s, freeport 1.2 to 115.2 kbit/s |
| Potential isolation | Inputs in groups of 6 and 8, outputs in groups of 5, 500 V DC between 24 V and 5 V |
| Connection method | pluggable I/O terminals |
| Degree of protection | IP20 |
| Ambient temperature during operation | horizontal 0 to 55 °C, vertical 0 to 45 °C |
| Relative humidity during operation | 5 to 95 % |
| Programming languages | LAD, FBD, STL |
| Know-how protection | 3-level password protection |
| Subroutines | max. 64 |
| Dimensions (W × H × D) | 140 × 80 × 62 mm |
| Weight | approx. 390 g |