| Processors | 80186 (16 bit) and 80188 (16 bit) microprocessors |
| User memory | integrated RAM, max. 64 × 2¹⁰ bytes |
| Integrated data block memory | 46 × 2¹⁰ bytes (DB RAM) |
| External program memory | memory card 374 with flash EPROM |
| Execution time per 1 K binary statements | 0.6 ms |
| Execution time per 1 K word statements | 1.5 ms |
| Flags | 2048 |
| S flags | 8192 |
| Timers | 256 |
| Counters | 256 |
| Digital inputs | max. 1024 with process image, max. 7168 without process image (P, O, IM3 and IM4 areas) |
| Digital outputs | max. 1024 with process image, max. 7168 without process image (P, O, IM3 and IM4 areas) |
| Analog inputs and outputs | max. 448 each instead of digital channels without process image |
| Blocks | 256 each of PB, SB, FB and FX, 256 each of DB and DX (253 of them freely available), OB 1 to 39 |
| Program execution | cyclic, time-controlled (9 timebases), real-time controlled, interrupt-driven, delayed |
| Multiprocessor operation | up to four CPUs in the S5-135U/155U central controller |
| Interface SI 1 | built-in programmer interface, 15-pin, 9600 bit/s |
| Interface SI 2 | via interface submodule as V.24, TTY, RS 422A/485 or programmer interface, for RK 512 computer link, 3964/3964R procedures, open driver or SINEC L1 |
| Controls | RUN/STOP mode switch, momentary-contact switch for overall reset, reset and restart |
| Indicators | RUN LED green, STOP LED red, red LEDs QVZ, ADF, ZYK and BASP, red fault LEDs SI1 and SI2 |
| Supply voltage | 5 V ±5%, 24 V +25%/−17% |
| Current consumption at 5 V | typ. 0.5 A |
| Current consumption at 24 V | max. 760 mA |
| Power loss | max. 3 W |
| Backup voltage | 3.4 V |
| Backup current | typ. 20 µA (at 25 °C) |
| Front plate width | 1 1/3 standard plug-in stations, space requirement 1 slot |
| Dimensions (W × H × D) | 20.32 × 233.4 × 160 mm |
| Weight | approx. 0.6 kg |
| Degree of protection | IP 00 |