| Construction | two ASICs and a microprocessor, additional microprocessor for the second interface |
| Total memory capacity | max. 49152 statements (one statement usually occupies 2 bytes) |
| Internal program memory | max. 49152 statements (internal RAM 96 KByte) |
| Memory submodule | EPROM max. 49152, EEPROM max. 8192 statements, contents are copied to the internal RAM |
| Execution time per binary operation | approx. 0.8 µs |
| Execution time per word operation | approx. 0.8 to 3.6 µs |
| Integrated clock | accuracy ±2 s/day, approx. 0 to −4 s/day at 40 °C |
| Scan time monitoring | approx. 500 ms (adjustable) |
| Flags | 2048, optionally half or all retentive |
| Timers | 128, optionally half or all retentive, time range 0.01 to 9990 s |
| Counters | 128, optionally half or all retentive, counting range 0 to 999 (up, down) |
| Digital inputs and outputs | max. 2048 in total |
| Analog inputs and outputs | max. 128 in total |
| Blocks | max. 256 each of OB, PB, FB (parameterizable) and SB, max. 254 DB |
| Block nesting depth | max. 32 |
| Operation set | approx. 170 operations |
| Interrupt response time | typ. 2 ms |
| Serial interfaces | 2 (SI 1 and SI 2) for programmer, operator panel or SINEC L1 |
| Functions at SI 2 | programmer and OP functions, SINEC L1, point-to-point connection (master function), ASCII driver, 3964(R) computer link with dedicated operating system submodule |
| Operating system | on a plug-in submodule, replaceable without opening the module |
| Controls | STOP/RUN mode selector, switch for retentivity preset (NR, RE) and overall reset (OR) |
| Indicators | RUN and STOP LEDs, fault indicators QVZ, ZYK and BASP |
| Backup current at power off | internal RAM approx. 100 µA, RAM submodule approx. 200 µA |
| Current consumption from 5 V | typ. 0.45 A |
| Current consumption from 24 V | 0.08 A without PG, 0.12 A with two PGs |
| Power loss | typ. 4.5 W, with two PGs typ. 5.5 W |
| Weight | approx. 0.8 kg |