Central processing unit with an application-specific integrated circuit for fast processing of bit operations and a microprocessor for word operations, timers, programmer interfacing and bus control. The internal RAM holds 1024 statements, and a plug-in RAM, EPROM or EEPROM memory submodule extends the program memory to up to 9216 statements. The front carries the mode selector, switches for retentivity and overall reset, LEDs for RUN and STOP and a serial interface.
General
| Manufacturer | Siemens |
| Type / model | CPU 941 |
| Article number | 6ES5941-7UA12 |
| Order number | 6ES5941-7UA12 |
| Series | S5-115U |
| Condition | Used |
Technical data
| Construction | ASIC for bit operations, microprocessor for word operations, timers, programmer interface and bus control |
| Total memory capacity | max. 9216 statements (one statement usually occupies 2 bytes) |
| Internal program memory | max. 1024 statements (internal RAM) |
| Memory submodule | RAM, EPROM or EEPROM, max. 8192 statements each |
| Execution time per binary operation | approx. 2.2 µs |
| Execution time per word operation | approx. 60 to 200 µs |
| Scan time monitoring | approx. 500 ms |
| Flags | 2048, of which 1024 optionally retentive |
| Timers | 128, of which 64 optionally retentive, time range 0.01 to 9990 s |
| Counters | 128, of which 64 optionally retentive, counting range 0 to 999 (up, down) |
| Digital inputs and outputs | max. 512 in total |
| Analog inputs and outputs | max. 128 in total |
| Blocks | max. 256 each of OB, PB, FB (parameterizable) and SB, max. 254 DB |
| Operation set | approx. 170 operations |
| Serial interface | 1 × TTY for programmer, operator panel or SINEC L1 |
| Controls | STOP/RUN mode selector, switch for retentivity preset (NR, RE) and overall reset (OR) |
| Indicators | RUN and STOP LEDs, no fault indicators |
| Current consumption from 5 V | 1.2 A |
| Current consumption from 24 V | 0.02 A with a PG 605 or PG 615 connected |
| Power loss | typ. 6 W, with PG typ. 6.5 W |
| Weight | approx. 1.5 kg |