| Design | PC Card Type II, CardBus (32 bit) |
| Interface | 1 × electrical in accordance with PROFIBUS, 9-pin Sub-D socket (RS 485) |
| Transmission rate | 9.6 kbit/s to 12 Mbit/s |
| Supply voltage from backplane bus | 3.3 V DC |
| Tolerance of the supply voltage | ± 5 % |
| Current consumption from backplane bus | max. 0.52 A |
| Power loss | 1.8 W |
| Ambient temperature during operation | 5 to 45 °C |
| Ambient temperature during storage | -20 to +60 °C |
| Ambient temperature during transport | -20 to +60 °C |
| Relative humidity during operation | max. 95 % at 25 °C, without condensation |
| Degree of protection | IP00 |
| Width | 86 mm |
| Height | 5 mm |
| Depth | 54 mm |
| Net weight | 130 g |
| Number of cards per PC station | 1 |
| Function as DP master | DPV0 yes, DPV1 no, DPV2 no |
| Number of DP slaves on the DP master | 64 |
| Address area of inputs as DP master, total | 7808 bytes |
| Address area of outputs as DP master, total | 7808 bytes |
| Address area per DP slave for inputs | 244 bytes |
| Address area per DP slave for outputs | 244 bytes |
| Address area per DP slave for diagnostic data | 244 bytes |
| Function as DP slave | DPV0 yes, DPV1 no |
| Address area of inputs as DP slave, total | 122 bytes |
| Address area of outputs as DP slave, total | 122 bytes |
| Connections for open communication (SEND/RECEIVE) | max. 50 |
| Connections for S7 and PG communication | max. 8 |
| Configurable connections per PC station | 207 |
| Port diagnostics | Yes |
| Required software as DP master | SOFTNET-PB DP |
| Required software as DP slave | SOFTNET-PB DP Slave |
| Required software for S7 communication | SOFTNET-PB S7 |
| EMC directive | 2004/108/EC |
| Emitted interference | EN 61000-6-3, EN 61000-6-4 |
| Interference immunity | EN 61000-6-1, EN 61000-6-2 |
| Safety (CSA and UL) | CAN/CSA C22.2 & UL 60950-1 |
| CE mark | Yes |
| C-Tick | Yes |