CP 443-1 communications processor in single S7-400 module width, which connects an S7-400 to Industrial Ethernet with 10/100 Mbit/s via ISO, TCP/IP and UDP. S7 communication, Fetch/Write, SEND/RECEIVE with and without RFC 1006, multicast and NTP are supported, and the 5 V DC supply comes from the backplane bus.
General
| Manufacturer | Siemens |
| Type / model | CP 443-1 |
| Article number | 6GK7443-1EX11-0XE0 |
| Order number | 6GK7443-1EX11-0XE0 |
| Series | SIMATIC NET |
| Condition | Used |
Technical data
| Transmission rate | 10 ... 100 Mbit/s |
| Interface | 1 × Industrial Ethernet, RJ45 port and sub-D socket 15-pin (AUI 10 Mbit/s, ITP 10/100 Mbit/s) |
| Supply voltage | 5 V DC from the backplane bus (±5 %) |
| Current consumption | typ. 1.4 A at 5 V DC |
| Power loss | 8.6 W |
| Operating temperature | 0 ... 60 °C |
| Storage temperature | -40 ... +70 °C |
| Relative humidity | max. 95 % at 25 °C, without condensation |
| Degree of protection | IP20 |
| Design | compact module S7-400, single width |
| Dimensions (W × H × D) | 25 × 290 × 210 mm |
| Weight | 0.7 kg |
| Number per CPU | max. 14 |
| SEND/RECEIVE connections | max. 64, max. 8 KB each (ISO, ISO on TCP, TCP) or 2 KB (UDP) |
| S7 connections | max. 48 |
| Multi-protocol mode | max. 64 active connections |
| Time of day | NTP, SICLOCK |
| Removable storage | no C-PLUG |
| Configuration | STEP 7 V5.1 SP2 or higher |