Basic module for distributed I/O with IP66/67 degree of protection, an integrated PROFIBUS DP interface up to 12 Mbit/s and eight digital inputs for 24 V DC on double-assigned 5-pin M12 connections. Up to seven expansion modules can be connected, and LEDs signal bus fault, group fault, the 24 V supply, the load voltage and the status of each input.
General
| Manufacturer | Siemens |
| Type / model | BM 141 |
| Article number | 6ES7141-1BF12-0XB0 |
| Order number | 6ES7141-1BF12-0XB0 |
| Series | SIMATIC ET 200X |
| Condition | Used |
Technical data
| Version according to order text | spare part, 8 DI 24 V DC, 5-pin M12, double-assigned, IP66/67, integrated PROFIBUS DP interface 12 Mbit/s, integrated power supply connections |
| Number of digital inputs | 8 |
| Input characteristic curve | according to IEC 61131, type 1 |
| Input voltage | rated value 24 V DC, signal 0 −3 to +5 V, signal 1 13 to 30 V |
| Input current for signal 1 | typ. 7 mA |
| Input delay | 1.2 to 4.8 ms from 0 to 1 and from 1 to 0 |
| Simultaneously controllable inputs | 8 in all mounting positions up to 55 °C |
| Unshielded cable length | max. 30 m |
| Connectable encoders | 2-wire sensors, permissible quiescent current max. 1.5 mA |
| Encoder supply | 4 outputs, electronic short-circuit protection, max. 0.9 A up to 40 °C, max. 0.7 A up to 55 °C |
| Load voltages | 1L+ 24 V DC with electronic short-circuit protection and reverse polarity protection, 2L+ 24 V DC without reverse polarity protection |
| Input current from the load voltage | max. 180 mA from 1L+ |
| Power loss | typ. 3.5 W |
| Expansion modules | max. 7, of which max. 6 motor starters or frequency converters and max. 6 pneumatic interfaces |
| Fieldbus | PROFIBUS DP device, max. 12 Mbit/s, SYNC and FREEZE, direct data exchange |
| Vendor identification | 803Dh |
| Diagnostics | parameterizable, diagnostic alarm, diagnostic information readable |
| Indicators | LED BF red, LED SF red, LED ON green, status per digital input green, load voltage monitoring |
| Electrical isolation | between load voltage and all other circuit components and between PROFIBUS DP and all other circuit components, none between the channels |
| Permissible potential difference | 75 V DC / 60 V AC |
| Isolation tested with | 500 V DC |
| Dimensions (W × H × D) | 134 × 110 × 55 mm |
| Weight | approx. 500 g |
| Degree of protection | IP66/67 |