PROFIBUS DP interface module with an RS 485 interface for up to 12 Mbit/s, to which up to 32 I/O modules are connected. The 50 mm wide module is supplied with 24 V DC, is protected against reverse polarity and shows run, error, maintenance, power and bus connection status via LEDs.
General
| Manufacturer | Siemens |
| Type / model | IM 155-6 DP HF |
| Article number | 6ES7155-6BU00-0CN0 |
| Order number | 6ES7155-6BU00-0CN0 |
| Series | SIMATIC ET 200SP |
| Condition | Used |
Technical data
| Number of I/O modules | max. 32, plus 16 ET 200AL modules |
| PROFIBUS interface | 1 RS 485 interface, PROFIBUS DP device |
| Transmission rate | max. 12 Mbit/s |
| Output current of the interface | max. 90 mA |
| Protocols | PROFIBUS DP with SYNC, FREEZE, DPV0 and DPV1, PROFIsafe |
| Module swapping during operation | yes, multi hot swapping |
| Isochronous mode | no |
| I&M data | I&M0 to I&M3 |
| Address space per module | max. 32 bytes per input and output |
| Address space per station | max. 244 bytes per input and output |
| Engineering | STEP 7 TIA Portal V13 SP1 or later, STEP 7 V5.5 SP4 or later, one GSD file each from revision 3 and 5 |
| Supply voltage | 24 V DC (19.2 to 28.8 V) |
| Reverse polarity protection | yes |
| Mains buffering | 5 ms |
| Current consumption | max. 250 mA |
| Inrush current | max. 4.5 A |
| Power loss | typ. 1.5 W |
| Electrical isolation | between PROFIBUS DP and all other circuits and between supply and all other circuits, not between backplane bus and electronics |
| Permissible potential difference | 75 V DC/60 V AC (basic insulation) |
| Isolation tested with | 707 V DC (type test) |
| Status indicators | RUN green, ERROR red, MAINT yellow, PWR green, DP green |
| Operating ambient temperature | 0 to 60 °C horizontal, 0 to 50 °C vertical |
| Dimensions (W × H × D) | 50 × 117 × 74 mm |
| Weight | approx. 150 g |
| Part of the spare part bundle | 6ES7155-6BA00-0CN0 with server module 6ES7193-6PA00-0AA0 and PROFIBUS connector 6ES7972-0BB70-0XA0 |