| Digital inputs | 16, non-isolated |
| Input voltage | 24 V DC, signal 0 at -30 to +5 V, signal 1 at 13 to 30 V |
| Input current at signal 1 | typ. 4 mA at 24 V, min. 2 mA |
| Input delay | 3 ms |
| Connection of two-wire sensors | possible, quiescent current max. 1.5 mA |
| Connection of mechanical switches | possible |
| Digital outputs | 16, isolated in two groups of 8 |
| Output current at signal 1 | max. 0.5 A |
| Output voltage | signal 0 max. 2 V (no load), signal 1 min. supply voltage minus 3 V |
| Residual current at signal 0 | max. 1 mA |
| Total current of outputs | max. 2 A per group up to 60 °C |
| Lamp load | max. 5 W |
| Switching frequency | max. 1000 Hz resistive, 0.5 Hz inductive, 8 Hz lamp load |
| Output delay | 0 to 1 max. 20 µs, 1 to 0 max. 0.5 ms |
| Short-circuit protection | yes, electronic |
| Limitation of inductive shutdown voltage | typ. L1+ or L2+ minus 55 V |
| Controlling a digital input | possible |
| Unshielded cable length | max. 100 m |
| Fieldbus | PROFIBUS DP, max. 12 Mbit/s, SYNC and FREEZE |
| Transmission rates | 9.6, 19.2, 93.75, 187.5, 500, 1500, 3000, 6000 and 12000 kBaud |
| Isolation from the bus | yes |
| Supply voltage | 24 V DC (L1+, L2+, L5+), permissible 18.5 to 30.2 V, 35 V for t < 0.5 s |
| Current consumption of the logic | typ. 85 mA from L5+ |
| Sensor supply | max. 1 A from L5+ |
| Inrush current | I²t 0.05 A²s |
| Power loss | max. 5.5 W |
| Matching terminal blocks | TB2/DC, TB2-4/DC, TB4/DC, according to the manual also TB4M/DC, according to the data sheet also TB4-4/DC |
| Connection method | screw-type or spring-loaded terminals on the terminal block, 3-wire and 4-wire connection |
| Indicators | LED RUN green, BF red, DIA red, L1+ and L2+ green, status per channel green |
| Operating ambient temperature | 0 to 60 °C horizontal, up to 40 °C in other mounting positions |
| Relative humidity | 15 to 95% in operation |
| Air pressure | 795 to 1080 hPa |
| Vibration | IEC 68 part 2-6, 10 to 57 Hz at 0.075 mm amplitude, 57 to 150 Hz at 1 g |
| Shock | IEC 68 part 2-27, half-sine 15 g, 11 ms |
| Dimensions (W × H × D) | 235 × 130 × 60 mm with terminal block |
| Weight | approx. 800 g with terminal block |