Frequency inverter in frame size C with a rated power of 5.5 kW for a three-phase mains voltage of 380 to 480 V, supplied without a filter. It delivers an output current of 13.2 A at an output frequency of 0 to 650 Hz and offers three digital inputs, one analogue input, one relay output, one analogue output and a serial RS-485 interface. The housing measures 185 × 245 × 195 mm, weighs 5.5 kg and has degree of protection IP20.
General
| Manufacturer | Siemens |
| Type / model | MICROMASTER 420, 5.5 kW, without filter |
| Article number | 6SE6420-2UD25-5CA1 |
| Order number | 6SE6420-2UD25-5CA1 |
| Series | MICROMASTER 420 |
| Condition | Used |
Technical data
| Rated power | 5.5 kW (7.5 hp) |
| Mains voltage | 3 AC 380 to 480 V ± 10 % |
| Mains frequency | 47 to 63 Hz |
| Output power | 10.1 kVA |
| Input current | 17.3 A (at 400 V, without line commutating choke) |
| Rated output current | 13.2 A |
| Output frequency | 0 to 650 Hz |
| Overload capability | 50 % for 60 s within 5 min, relative to the rated output current |
| Efficiency | 96 to 97 % |
| Power factor | ≥ 0.7 |
| Pulse frequency | 2 kHz to 16 kHz (2 kHz steps) |
| Control method | linear V/f control, V/f control with flux current control (FCC), parabolic V/f characteristic, multi-point V/f control |
| Fixed frequencies | 7, programmable |
| Skip frequency ranges | 4, programmable |
| Setpoint resolution | 0.01 Hz digital and serial, 10 bit analogue |
| Digital inputs | 3, programmable, isolated, switchable PNP/NPN |
| Analogue input | 1 (0 to 10 V, scalable, usable as 4th digital input) |
| Relay output | 1, programmable, DC 30 V / 5 A (resistive load), AC 250 V / 2 A (inductive load) |
| Analogue output | 1, programmable (0 to 20 mA) |
| Serial interface | RS-485, optional RS-232 |
| Braking | DC braking, compound braking |
| Radio interference filter | not integrated (filter class A or B per EN 55011 available as accessory) |
| Recommended fuse | 20 A (3NA 3807) |
| Input cable (cross-section) | 2.5 to 10 mm² (AWG 13 to 7) |
| Output cable (cross-section) | 1.5 to 10 mm² (AWG 15 to 7) |
| Tightening torque power terminals | 2.25 Nm |
| Cooling air flow | 54.9 l/s |
| Degree of protection | IP20 |
| Operating temperature | -10 to +50 °C |
| Storage temperature | -40 to +70 °C |
| Relative humidity | < 95 %, condensation not permitted |
| Installation altitude | up to 1000 m above sea level without derating |
| Standards | UL, cUL, CE, C-tick |
| Frame size | C |
| Dimensions (W × H × D) | 185 × 245 × 195 mm |
| Weight | 5.5 kg |