| Motor power | 2.2 kW (3 hp) |
| Motor type | asynchronous motors |
| Rated supply voltage | 380 to 500 V (−15% to +10%), three-phase |
| Supply voltage limits | 323 to 550 V |
| Supply frequency | 50 to 60 Hz (±5%), permissible 47.5 to 63 Hz |
| Line current | 8.9 A at 380 V, 6.7 A at 500 V |
| Prospective line short-circuit current | 5 kA |
| Apparent power | 5.9 kVA |
| Continuous output current | 5.5 A at 4 kHz |
| Maximum transient current | 8.3 A for 60 s |
| Power loss | 79 W at nominal load |
| EMC filter | integrated |
| Switching frequency | 4 kHz nominal, adjustable 2 to 16 kHz |
| Motor control profile | sensorless flux vector control with PWM, factory setting constant torque |
| Speed range | 1 to 50 |
| Transient overtorque | 170 to 200% of nominal motor torque |
| Braking torque | 100% with braking resistor continuously, 150% with braking resistor for 60 s, 150% without braking resistor |
| Acceleration and deceleration ramps | linear, separately adjustable 0.1 to 999.9 s, S, U or customized |
| Braking to standstill | by DC injection |
| Analog inputs | 3, AI1 0 to 10 V (30000 Ω), AI2 ±10 V (30000 Ω), AI3 0 to 20 mA (250 Ω) |
| Analog output | 1, AOV 0 to 10 V (470 Ω) or AOC 0 to 20 mA (800 Ω), 8-bit resolution |
| Logic inputs | 6 (LI1 to LI6), programmable, 24 V, 3500 Ω, positive or negative logic |
| Relay outputs | 2, R1 with 1 NO and 1 NC contact, R2 with 1 NC contact |
| Relay switching capacity | max. 5 A at 250 V AC or 30 V DC resistive, 2 A inductive, min. 10 mA at 5 V DC |
| Communication | Modbus and CANopen via RJ45 (RS485), Modbus 4800, 9600 or 19200 bit/s, CANopen 10 kbit/s to 1 Mbit/s |
| Option cards | CANopen Daisy Chain, DeviceNet, Fipio, Modbus TCP, PROFIBUS DP |
| Indicators | four-digit 7-segment display, red LED for drive voltage |
| Protection functions | line phase loss, line overvoltage and undervoltage, motor phase break, short circuit between motor phases, overcurrent between output phases and earth (on power up only), overheating, motor thermal protection |
| Degree of protection | IP20 on upper part without cover plate, IP21 on connection terminals, IP31 and IP41 on upper part |
| Terminal cross-sections | control terminals 2.5 mm² (AWG 14), power terminals 5 mm² (AWG 10) |
| Tightening torque | 0.6 Nm on control terminals, 1.2 Nm on power terminals |
| Dimensions (H × W × D) | 184 × 142 × 152 mm |
| Weight | 3.1 kg |
| Operating ambient temperature | −10 to 50 °C without derating with protective cover on top, −10 to 60 °C with derating without protective cover |
| Storage and transport temperature | −25 to 70 °C |
| Relative humidity | 5 to 95%, without condensation and without dripping water |
| Operating altitude | up to 1000 m without derating, 1000 to 3000 m with current derating of 1% per 100 m |
| Operating position | vertical ±10° |
| Vibration resistance | 1.5 mm at 3 to 13 Hz, 1 gn at 13 to 150 Hz according to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms according to EN/IEC 60068-2-27 |
| Dielectric strength | 2410 V DC between earth and power terminals, 3400 V AC between control and power terminals |
| Standards | IEC 61800-3, IEC 61800-5-1 |
| Certifications | CE, CSA, C-Tick, DNV, GOST, NOM, UL |