| Version | ADVANCED, configurable (C), line 01, design 1 |
| Master communication | SERCOS interface (SE), fiber optic cable on X20 (transmitter) and X21 (receiver), data rate and transmission power adjustable via X2 or control panel |
| Encoder interface X4 (option 1) | EN2 for EnDat 2.1 with sense lines, sine encoders 1 Vpp and square-wave encoders TTL with reference track, 15-pin D-sub connector |
| Encoder supply | typ. 5.0 V (4.75 to 5.25 V with sense return), max. 350 mA |
| Sine signal input | 0.8 to 1.2 Vpp, cut-off frequency typ. 500 kHz, A/D converter 12 bit, 120 Ω |
| Square-wave signal input | max. 1000 kHz. 120 Ω |
| Option slots X8 and X10 | not equipped (NNN) |
| Safety option X41 | S1, inputs and outputs for safety technology, 9-pin D-sub socket, only permitted with an encoder on X4 |
| Safety functions | among others safety-related standstill, drive interlock, reduced speed and direction of motion |
| Inputs and outputs on X41 | 4 inputs for operating mode selection (24 V, 3 mA), 3 inputs or outputs (24 V, 3 mA or 0.5 A), N/O contact DC 24 V, 1 A, supply DC 19.2 to 30 V, max. 1.6 A |
| Control panel | standard control panel (S) with single-line display, must be plugged in at switch-on, not hot-pluggable |
| Firmware | not included, separate order item (FW) |
| Digital inputs | I_1 to I_7 on X31/X32, 24 V, 3 mA, I_1 and I_2 as probe inputs typ. 1 µs, I_6 and I_7 alternatively as analog input |
| Digital inputs and outputs | 4 (I/O_8 to I/O_11 on X32), as output 24 V, 0.5 A |
| Analog input | 1 voltage input ±10 V on X32.4/X32.5, typ. 2 kΩ, 12 bit incl. sign |
| Analog outputs | 2 voltage outputs 0 to 5 V on X32.1/X32.2, max. 1 mA, 8 bit, short-circuit proof |
| Relay contact | Rel 1 on X31.1/X31.2, DC 24 V, 1 A, ready for operation signal |
| Supply of inputs and outputs | external on X31.8/X31.9, DC 19 to 30 V, max. 1.1 A |
| Serial interface | RS232 on X2 |
| Memory card slot | X7 for memory card PFM02.1 (MultiMediaCard), card not in standard scope of supply |
| Power consumption of basic unit | 7.5 W at DC 24 V with memory card and control panel at maximum permitted output load, plus optional modules |
| Power consumption of optional modules | SE 2 W, EN2 6 W, S1 1 W |
| Inrush current | typ. 4 A, pulse width max. 100 ms |
| Cross-section X31 and X32 | 0.08 to 1.5 mm² (AWG 28 to 14) |
| Dimensions (W × H × D) | 49.5 × 241 × 103 mm according to dimension drawing |